Printing Repair Templates

1: Leader Repair Template
    It is of the utmost importance that the "V" at the end of the roll be
    properly located. If not, the roll will track incorrectly, causing torn
    edges, etc

    Print out one of these on "Heavy Card Stock" paper of 8-1/2" by 14"
    Cut out the template and place it over the end of the roll. Mark the end
    of the roll along the edges of the template, then cut the roll along your
    markings. 

2: Box End Reinforcements 
    After selecting this option, you will be asked to two numbers.
   Enter the width of the box (in mm) and height of the box (in mm)
        Print this on  "Heavy Card Stock" paper.
        Cut out the template and fold over the edges.
        Spread your favorite glue on the reinforcement.
        Place the reinforcement into the end of the box.

Visit www.PianoRollStuff.com for all your piano roll archival needs!